Resources

Powder Coating

POWDER COATING MSDS


1. IDENTIFICATION OF SUBSTANCE

Product description: Powder Coating
Manufacturer/Supplier: Address: Parth Chemtech, Plot No. G – 1340, G.I.D.C. Metoda, Kalawad Road, Dist. Rajkot, Metoda – 360021 (Gujarat – Inidia).
Tele./Fax: 0091 – 2827 – 287009
E-mail: info@nicecoatindia.com
Website: http://www.nicecoatindia.com

2. COMPOSITION/DATA ON COMPONENTS


Chemical characterization:
Description: Mixture of the substances listed below with non-hazardous additions.
Dangerous components: POLYMER OF EPOXY RESIN AND BISPHENOL A 50-100%
TITANIUM DIOXIDE 0-30%
BARIUM SULPHATE 0-30%
CALCIUM CARBONATE 0-10%
ORGANIC ACID SALT 0-5%

3. HAZARDOUS IDENTIFICATONS


Hazard description: Harmful
Information pertaining to particular danger for man and environment: Harmful by inhalation and if swallowed. May cause sensitization by inhalation
Classification system: Classification was made according to the latest editions of international substances lists, and expanded upon from company and literature data.

4. FIRST AID MEASURES


After inhalation: Supply fresh air and to be sure call for a doctor.
After skin contact: Generally the product does not irritate the skin
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: Rinse mouth out and then drink plenty of water. If symptoms persist consult doctor.

5. FIRE FIGHTING MEASURES


Suitable extinguishing agents: Use CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: Wear self-contained respiratory device.

6. ACCIDENTAL RELEASE MEASURES


Person-related safety precautions: Ensure adequate ventilation.
Measures for environmental protection: Do not allow to enter sewer/surface or ground water.
Measures for cleaning/collecting: Pick up mechanically. Dispose contaminated material as waste according to item 13.

7. HANDLING AND STORAGE

Handling


Information for safe handling: Prevent formation of dust. Ensure good ventilation/exhaustion at the workplace.
Information about protection against explosions and fires: Dust can combine with air to form an explosive mixture.

Storage


Requirements to be met by storerooms and receptacles: Store in cool, dry place, in tightly closed container. Storage temperature not to exceed 25° C/77° F to ensure product quality. Performance of the product will deteriorate Protect from heat and direct sunlight. Protect from humidity and water.
Information about storage in one common storage facility: Not required

8. EXPOSURE CONTROLS AND PERSONAL PROTECTION


Additional information about design of technical systems: No further data; see item 7.
CALCIUM CARBONATE: ACGIH TLV: 10 mg/m3(e)
NIOSH REL: 10*; 5** mg/m3
*Total dust ** Respirable fraction
OSHA PEL: 15*; 5** mg/m3
*Total dust ** Respirable fraction
Additional information: The lists that were valid during the creation were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Wash hands before breaks and at the end of work. The usual Precautionary measures for handling chemicals should be followed.
Breathing equipment In case of brief exposure or low pollution use respiratory filter devise. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
Protection of hands: Not required.
Eye protection: Not required.

9. Physical and chemical properties


Form: Solid, finely divided powder.
Colour: According to product specifications.
Odour: Nearly odourless.
Change in condition:
Melting point/range 70-80° C/158-176° F
Boiling point/range: Not applicable.
Flash point: Not applicable.
Auto igniting: Product is not self-igniting.
Danger of explosion: Product does not normally present an explosive hazard. However, dust can combine with air to form an explosive mixture if it comes in contact with a source of ignition.
LOWER EXPLOSION LIMIT: 15 g/m3
UPPER EXPLOSION LIMIT: 50 g/m3
Density 1.4 g/cm3 – 1.7g/cm3
Solubility in/miscibility with water Not miscible or difficult to mix.

10. STABILITY AND REACTIVITY


Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions: No dangerous reactions known.
Dangerous products of decomposition: No dangerous decomposition products known.

11. TOXICOLOGICAL INFORMATION


Primary irritant effect: On the skin – No irritant effect.
On the eye – No irritant effect.
Sensitization: Sensitization possible through inhalation.
Additional toxicological information: The product shows the following danger according to internally approved calculation methods for preparations Harmful.

12. ECOLOGICAL INFORMATION


General notes: Water hazard class 1 (self-assessment): slightly hazardous for water.

13. DISPOSAL CONSIDERATIONS


Product
Recommendations
Must not be disposed of together with household garbage. Do not allow product to reach sewage systems.
Uncleaned packaging
Recommendations
Disposal must be made according to official regulation

14. TRANSPORTATION INFORMATION


Road and Rail Transport: Not classified as a Dangerous Goods.
Marine Transport: Not classified as Dangerous Goods by the criteria of the International Maritime dangerous Goods Code (IMDG Code) for transport by sea; NON-DANGEROUS GOODS.
Air Transport: Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air; NON-DANGEROUS GOODS.

15. REGULATIONS


Product related hazard information: The product has been classified and marked in accordance with directives on hazardous materials
Hazard symbols: Harmful
Hazard-determining components of labeling: Risk phrases
Harmful by inhalation and if swallowed. May cause sensitization by inhalation and skin contact.
Safety phrases: Keep out of the reach of children.
Keep container dry.
Keep container in a well ventilated place.
Keep away from food, drink, and anima.
Do not breathe gas/fumes/vapour/spray.
If swallowed, seek medical advise immediately and show this container or label.

16. OTHER INFORMATION
This MSDS summarized to our best knowledge at the date of issue, the chemical health and safety hazards of the material and general guidance on how safely handle the material in the workplace. Since Parth Chemtech can not anticipate or control the conditions under which the product may be used, each user must, prior to usage, assess and control the risks arising from its use of the material. If clarification or further information is needed, the user should contact their Parth Chemtech representative or Parth Chemtech at the contact details given on page 1. Parth Chemtech’s responsibility for the material as sold is subject to the terms and conditions of sale, a copy of which is available upon request.



×

^